Split Stitch Embroidered Bib – Free sewing patterns

Essentials

Fabric: cotton, plain, 30cm square; backing, 25cm x 30cmWadding, lightweight, washable, 25cm x 30cmThread: embroidery, six-stranded; sewing,coordinatingNeedle: crewel; sewingBias binding, 1.5cm x 160cm

Dimensions List

21cm x 26cm

Make a baby bib

Download the template to find the colours of thread needed. Download the bib template and embroidery motifs, and print. Trace the bib shape onto white cotton fabric but do not cut out. Transfer your chosen embroidery design (see p81) onto the fabric in the centre of the bib shape. Place in an embroidery hoop.

Thread a crewel needle with two strands of embroidery thread and outline the shape you are going to fill with a line of split stitch. It is a good idea to start in the centre of the design and work outwards, so for the kitten you could start with the muzzle, and for the rabbit you could start with the shirt front.

Using the same thread, fill in the shape with split stitch, ensuring the lines of stitches are close together so that the fabric within the shape is completely covered. For some of the smaller shapes, such as the centre of the kitten’s bow, the base of the cupcake and the centres of the eyes, use satin stitch instead of split stitch (see p98).

To emphasise certain areas of the design, such as the outline of the eyes, the whiskers and claws, thread your needle with a single strand of black thread and, still working in split stitch, carefully outline. Other areas can be worked with a single strand of mid-grey or dark grey, such as the soles of the rabbit’s feet and the edges of the head and ears.

When you have finished the embroidery, remove the work from the hoop. Place a folded towel on an ironing board, put the work upside down on top and press carefully on the wrong side. Trim around the bib shape. Cut the same shape from lightweight wadding and backing fabric. Place the wadding between the two fabrics and tack around the edges through all thicknesses.

Bind the outer edge of the bib with bias binding. Take the remaining bias binding, find the centre and place this in the middle of the neck edge. Bind this edge, then stitch the two folded sides of the remaining long lengths together to form ties.